-
Address:
Chennai
-
Mail us:
info@earthtekniks.com
- GET A QUOTES
ATR-P TOUCH
- High-performance refractometer
- Rugged measuring head (IP65)
- Single or flow-through measurements
- For permanent use in production laboratories
- Combination with polarimeter (Purity Analyser)
Description
ATR-P TOUCH
The critical angle refractometer ATR-P is especially designed for applications in the sugar industry. Complete system consists of the ATR-P measuring head and the “L-Controller” electronic unit. As an alternative to the “L-Controller” electronic unit, the ATR-P measuring head can be connected to a PC or laptop. In the minimal version configuration and calibration are performed using a supplied free-software. Much more comfortable and is the PC software “Aquisys Basic”.
Main Features:
- High-performance robust Refractometer for the determination of mixing ratios (mass percent)
- Quality and quantity control of liquids, especially for sucrose solutions
- Highly accurate and reproducible measuring results in no time at all
- Electronic unit separated from measuring head
- Very robust and waterproof measuring head made from stainless steel
- Operating mode alternatively in horizontal or vertical position
- Single or flow-through measurement
- Various sample room covers / flow through doors optionally available
- Temperature correction of samples via external water bath – rapid temperature correction even larger sample volumes
- Temperature compensation of Brix scale
- Easy to calibrate with sucrose solutions
- Measuring head can be connected to the PC and operated as stand-alone device
- Adopted user friendly Operation System displayed by a high resolution 7″ TFT Touchscreen
- Modern and robust design for rough environments
- Documentation according to GLP/GMP
- Energy saving LED light source
Main specifications
| Measuring scales | Refractive Index (RI) Sucrose (%Brix) Customised scales |
| Measuring range | 1,32000 – 1,54000 RI / 100 % Brix |
| Resolution | 0,00001 RI / 0,01 % Brix |
| Precision | ± 0,00002 RI / ± 0,02 % Brix |
| Reproducibility | ± 0,00001 RI / ± 0,01 % Brix |
| Measurement mode | Single sample or flow through measurement |
Temperature
| Ambient temperature | +10 – +40 °C |
| Temperature measurement | NTC sensor for measurement of sample temperature placed inside the prism |
| Temperature control sample | By external water bath |
| Temperature control range | +5 – +50 °C |
| Temperature resolution | 0.01 °C |
| Temperature precision | ± 0.03 °C |
| Temperature reproducibility | ± 0.02 °C |
| Temperature compensation Brix | +5 bis +50 °C |
Additional Information
| Prism | Saphire |
| Light source/wavelength | LED, interference filter 589 nm |
| Display | 7″ touch screen, 800 x 480 Pixel, 16 Bit colours |
| Operation | Touchscreen, keyboard, mouse, barcode-reader, remote via PC |
| Interfaces/communication | 2xRS232 C serial, 3xUSB (A), 1xUSB (B), 1xEthernet, easy connection of keyboard, mouse, printer, bar code reader, PC and network |
| Power consumption (measuring head) | 90 V / 50 Hz – 1,5 W 90 V / 60 Hz – 1,4 W 110 V / 50 Hz – 1,4 W 110 V / 60 Hz – 1,5 W 230 V / 50 Hz – 1,6 W 230 V / 60 Hz – 1,7 W |
Conformity
| Standards* | International Pharmacopoea, ASTM, ICUMSA and others |
* Specific standard depends on application and the country it is used in. Details on request.